1973-1987 Squarebody K5 Blazer / Jimmy

With the age of your truck, your factory parts may have started to rust and you may want to replace them. With these spring plates you can retain all your factory parts U-Bolts, leafs ect...   Included: Pair of spring plates Vehicles: 1973-1987...

1973-1987 C10 K-5 Blazer Jimmy Squarebody 5" Rear Lowering Flip KitThis kit includes a pair rear axel relocators that flip the leafs to below the axle. By doing this you can accomplish a 5" drop in the rear of your truck.Included: 5" Flip...

1973-1987 C10 K5 Blazer Jimmy 2WD 2" Rear Lowering ShacklesCrown Suspension drop shackles will lower your truck 2".  This kit contains 2 shackle one for each side of your truck. This is the easiest way to take the rake out of you truck and...

1973-1987 C10 K5 Blazer Jimmy Squarebody C-10 U-boltsWith a 20 Year + old truck sometimes it is easier to cut off your old rusty U-bolts and replace them with brand new zinc plated made in the USA bolts. These are the factory length and will work with...

Laser cut and powder coated front upper bag plates. They can be used with 2500 or 2600 air bags, no cutting or welding is required! Simply bolt the plate to you upper coil pocket and use in conjunction our lower bag cups. (lower cups not included)

1973-1987 C10 K-5 Blazer Jimmy Squarebody 5" Rear Lowering Flip Kit & Shock ExtendersThis is the most economical way to flip the rear of your truck and achieve a 5” drop! The kit includes a pair of axle saddles for your rear end to sit in when...

Our springs are wound from the highest quality spring material available. Hot wound springs are quenched and tempered. Both hot and cold wound springs are stress relieved in a continuous oven, shot peened to increase fatigue life, and set removed to...

Our springs are wound from the highest quality spring material available. Hot wound springs are quenched and tempered. Both hot and cold wound springs are stress relieved in a continuous oven, shot peened to increase fatigue life, and set removed to...

1973-1987 Squarebody K5 Blazer Jimmy 2WD Frame C-Notch This is for a Crown Suspension C-Notch Kit. The kit includes a pair of c-notches designed, laser cut, welded from 1/4" steel made in the USA. These will help if you have dropped you truck and...

1963-1987 C10 Air Ride Lower Control Arm Drop PocketsOur C10 Drop Pocket kit is designed to replace your lower control arm spring pocket with a air bag pocket. With this kit you will get the lowest you can go on air ride combine these with lowering...

1973-1987 C10 K5 Blazer Jimmy Squarebody Pro Flip Kit This is a complete 5” flip kit nothing else needed! The kit includes Axle relocators to flip your rear end to the top of the leaf pack, replacement U-Bolts and springs plates so that you can...

1973-1987 C10 K5 Blazer Jimmy Squarebodyr 3/5 Economy Lowering Kit Our Economy Kit includes 3" front lowering springs and a 5" rear flip kit. This is the least expesive way to lower you Squarebody C10 or Blazer/Jimmy.  The Drop: 3" Front 5"...

Our C10 Drop Pocket kit is designed to replace your lower control arm spring pocket with a air bag pocket. With this kit you will get the lowest you can go on air ride combine these with lowering spindles to get your factory cross member to touch the...

LS Swap Conversion Stainless Steel Headers Great for your LS swap in your C-10, Chevelle, Camaro, Nova, Malibu and several other applications! 1-5/8'' Primary 2.50'' Collectors 3/8'' Flange Fits: LS1 - 5.7 LS2 - 6.0 LS3 - 6.2 Ls6 - 5.7 LS9 - 6.2 LM7 - 5...

1973-1987 C10 K5 Blazer Jimmy Squarebody Lowering Drop ShocksThis shock kit is to be used with an existing installed lowering kit. So if youve got a lowering kit that you're installing or already have one that has blown shocks this is the kit for you...

1973-1987 C10 K-5 Blazer Jimmy Squarebody 3" Lowering Spindles 1.25" RotorsThis kit includes a pair of 3" lowering spindles, spindles are the best way to lower you truck as they keep the stock ride. Please note these spindles will only work on the 2wd...

1973-1987 C10 K-5 Blazer Jimmy Squarebody 3/5" Lowering Drop 1" RotorsThis kit includes a pair of lowering 3" spindles, spindles are the best way to lower you truck as they keep the stock ride. Also included are a pair of axle re locators to...